for Kitchen Accessories
Home
|
Go Shopping
|
Terms
|
Site Map
|
Enquiries
Sales Enquiries 0870 803 0497 (9am - 5.30pm)
Departments
Help
Using This Site
Call Back
Order Brochure
Design Services
Kitchen Accessories
>
Drawer Accessories
Blum Tandem cutlery tray, 1000mm unit, plastic, grey
A plastic cutlery insert for a 1000mm wide Blum Tandem drawer. 914x422mm, grey.
Item: BTPCI1000GY
Price: £18.81
(Inc VAT at 15%)
Quantity:
Blum Tandem cutlery tray, 900mm unit, plastic, grey (picture shows tray for 1000mm unit)
A plastic cutlery insert for a 900mm wide Blum Tandem drawer. 814x422mm, grey.
Item: BTPCI900GY
Price: £18.00
(Inc VAT at 15%)
Quantity:
Blum Tandem cutlery tray, 800mm unit, plastic, grey (picture shows tray for 1000mm unit)
A plastic cutlery insert for an 800mm wide Blum Tandem drawer. 714x422mm, grey.
Item: BTPCI800GY
Price: £16.71
(Inc VAT at 15%)
Quantity:
Blum Tandem cutlery tray, 600mm unit, plastic, grey (picture shows tray for 1000mm unit)
A plastic cutlery insert for a 600mm wide Blum Tandem drawer. 514x422mm, grey.
Item: BTPCI600GY
Price: £10.37
(Inc VAT at 15%)
Quantity:
Blum Tandem cutlery tray, 500mm unit, plastic, grey (picture shows tray for 1000mm unit)
A plastic cutlery insert for a 500mm wide Blum Tandem drawer. 414x422mm, grey.
Item: BTPCI500GY
Price: £9.11
(Inc VAT at 15%)
Quantity:
Blum Tandem cutlery tray, 400mm unit, plastic, grey (picture shows tray for 1000mm unit)
A plastic cutlery insert for a 400mm wide Blum Tandem drawer. 314x422mm, grey.
Item: BTPCI400GY
Price: £7.85
(Inc VAT at 15%)
Quantity:
Knife block
Suitable for cutlery insert codes 556.53.550/560/580/590/600
Lacquered beech plywood
Item: 556.53.310
Price: £35.91
(Inc VAT at 15%)
Quantity:
Cutlery insert with plastic lip around the edge 240mm wide, lip can be cut to a minimum of 200mm wide, 485mm deep again lip can be cut to a minimum of 440mm deep. Height 50cm.
With 2 x horizontal cutlery compartments at the top and 1 x verticle compartment at the bottom
2.5 mm thick plastic
silver grey high gloss finish
For use in 300mm wide cabinet 600mm deep
Item: 556.53.530
Price: £7.19
(Inc VAT at 15%)
Quantity:
Cutlery insert with plastic lip around the edge 340mm wide, lip can be cut to a minimum of 300mm wide, 485mm deep again lip can be cut to a minimum of 440mm deep. Height 50cm.
With 4 x horizontal compartments
2.5 mm thick plastic
silver grey high gloss finish
For use in 400mm wide cabinet 600mm deep
Item: 556.53.540
Price: £8.04
(Inc VAT at 15%)
Quantity:
Cutlery insert with plastic lip around the edge for 300mm units. 2 large & 1 small compartments
silver grey high gloss finish
Item: 300cutlery
Price: £8.04
(Inc VAT at 15%)
Quantity:
Cutlery insert with plastic lip around the edge 390mm wide, lip can be cut to a minimum of 350mm wide, 485mm deep again lip can be cut to a minimum of 440mm deep. Height 50cm.
With 1x vertical compartment on the left hand side and 4 x horizontal on the right hand side
2.5 mm thick plastic
silver grey high gloss finish
For use in 450mm wide cabinet 600mm deep
Item: 556.53.545
Price: £7.73
(Inc VAT at 15%)
Quantity:
Cutlery insert with plastic lip around the edge 440mm wide, lip can be cut to a minimum of 400mm wide, 485mm deep again lip can be cut to a minimum of 440mm deep. Height 50cm.
With 1x vertical compartment on the right hand side and 4 x horizontal on the left hand side
2.5 mm thick plastic
silver grey high gloss finish
For use in 500mm wide cabinet 600mm deep
Item: 556.53.550
Price: £7.99
(Inc VAT at 15%)
Quantity:
Cutlery insert with plastic lip around the edge 540mm wide, lip can be cut to a minimum of 500mm wide, 485mm deep again lip can be cut to a minimum of 440mm deep. Height 50cm.
With 1x vertical compartment each side with 4 x horizontal compartments in the middle
2.5 mm thick plastic
silver grey high gloss finish
For use in 600mm wide cabinet 600mm deep
Item: 556.53.560
Price: £8.72
(Inc VAT at 15%)
Quantity:
Cutlery insert with plastic lip around the edge 740mm wide, lip can be cut to a minimum of 700mm wide, 485mm deep again lip can be cut to a minimum of 440mm deep. Height 50cm.
With 3 x vertical compartments 1 on the left and 2 on the right with 4 x horizontal compartments in the middle
2.5 mm thick plastic
silver grey high gloss finish
For use in 800mm wide cabinet 600mm deep
Item: 556.53.580
Price: £13.95
(Inc VAT at 15%)
Quantity:
Cutlery insert with plastic lip around the edge 840mm wide, lip can be cut to a minimum of 800mm wide, 485mm deep again lip can be cut to a minimum of 440mm deep. Height 50cm.
With 4 x vertical compartments 1 on the left and 3 on the right with 4 x horizontal compartments in the middle
2.5 mm thick plastic
silver grey high gloss finish
For use in 900mm wide cabinet 600mm deep
Item: 556.53.590
Price: £19.42
(Inc VAT at 15%)
Quantity:
Cutlery insert with plastic lip around the edge 940mm wide, lip can be cut to a minimum of 900mm wide, 485mm deep again lip can be cut to a minimum of 440mm deep. Height 50cm.
With 5 x vertical compartments 2 on the left and 3 on the right with 4 x horizontal compartments in the middle
2.5 mm thick plastic
silver grey high gloss finish
For use in 1000mm wide cabinet 600mm deep
Item: 556.53.600
Price: £22.23
(Inc VAT at 15%)
Quantity:
Divider 11mm thick 424mm deep
For use with multi-purpose inserts codes 556.54.540/545/550/560
Lacquered beech
Item: 556.54.319
Price: £16.85
(Inc VAT at 15%)
Quantity:
Multi-purpose insert with a plastic lip around 340mm wide, lip can be ciut to a minimum of 300mm, 485mm deep again can be cut to a minimum of 440mm deep. Height 50cm.
No compartments in this tray, use dividers to make up compartments if required (dividers ordered seperately on 556.54.319). Dividers can be positioned as required.
2.5 mm thick plastic
Silver grey high gloss finish
For cabinet size 400mm Wide
Item: 556.54.540
Price: £11.52
(Inc VAT at 15%)
Quantity:
Multi-purpose insert with a plastic lip around 390mm wide, lip can be ciut to a minimum of 350mm, 485mm deep again can be cut to a minimum of 440mm deep. Height 50cm.
No compartments in this tray, use dividers to make up compartments if required (dividers ordered seperately on 556.54.319). Dividers can be positioned as required.
2.5 mm thick plastic
Silver grey high gloss finish
For cabinet size 450mm Wide
Item: 556.54.545
Price: £12.94
(Inc VAT at 15%)
Quantity:
Multi-purpose insert with a plastic lip around 440mm wide, lip can be ciut to a minimum of 400mm, 485mm deep again can be cut to a minimum of 440mm deep. Height 50cm.
No compartments in this tray, use dividers to make up compartments if required (dividers ordered seperately on 556.54.319). Dividers can be positioned as required.
2.5 mm thick plastic
Silver grey high gloss finish
For cabinet size 500mm Wide
Item: 556.54.550
Price: £13.81
(Inc VAT at 15%)
Quantity:
Multi-purpose insert with a plastic lip around 540mm wide, lip can be ciut to a minimum of 500mm, 485mm deep again can be cut to a minimum of 440mm deep. Height 50cm.
No compartments in this tray, use dividers to make up compartments if required (dividers ordered seperately on 556.54.319). Dividers can be positioned as required.
2.5 mm thick plastic
Silver grey high gloss finish
For cabinet size 600mm Wide
Item: 556.54.560
Price: £14.97
(Inc VAT at 15%)
Quantity:
Two-tier cutlery insert
Bottom tray has a plastic lip around that is 440mm wide and can be cut to a minimum of 390mm,485mm deep and again can be cut to 435mm.
Top tray is 363mm Wide and 423mm deep
ball bearing runners
2.5 mm thick plastic
White lined finish
For cabinet 500mm wide, 600mm deep
Item: 556.68.856
Price: £57.52
(Inc VAT at 15%)
Quantity:
Cutlery insert cream-white 440-480mm deep, cab 400mm textured
With a generous border allowance for trimming to size
Once trimmed the insert will fit in cabinets with depths less than 600 mm
This material is too sturdy to cut with just scissors or a sharp knife
3 mm thick plastic
Cream-white textured moulded plastic
Item: 556.75.430
Price: £10,417.85
(Inc VAT at 15%)
Quantity:
Cutlery insert cream-white 440-480mm deep, cab 450mm textured
With a generous border allowance for trimming to size
Once trimmed the insert will fit in cabinets with depths less than 600 mm
This material is too sturdy to cut with just scissors or a sharp knife
3 mm thick plastic
Cream-white textured moulded plastic
Item: 556.75.440
Price: £104.48
(Inc VAT at 15%)
Quantity:
Cutlery insert cream-white 440-480mm deep, cab 500mm textured
With a generous border allowance for trimming to size
Once trimmed the insert will fit in cabinets with depths less than 600 mm
This material is too sturdy to cut with just scissors or a sharp knife
3 mm thick plastic
Cream-white textured moulded plastic
Item: 556.75.450
Price: £11.95
(Inc VAT at 15%)
Quantity:
Cutlery insert cream-white 440-480mm deep, cab 600mm textured
With a generous border allowance for trimming to size
Once trimmed the insert will fit in cabinets with depths less than 600 mm
This material is too sturdy to cut with just scissors or a sharp knife
3 mm thick plastic
Cream-white textured moulded plastic
Item: 556.75.470
Price: £13.23
(Inc VAT at 15%)
Quantity:
Plywood drawers sides 90mm high
Dowel construction, for cabinets with 18 mm board thickness
Individually flat-packed with 3.2 mm fibre-board base
All sides are 12 mm plywood birch, stained and lacquered
These drawers have been especially designed for use with the roller runner 423.68.445
see end of section. Drawer size:239 x 90 x 430mm long FOR A CABINET 300mm WIDE
Departments