To suit oven drawer set
Silver coloured Ral 9006 steel wire

The actual width of the 500 basket for clearance purposes is 376mm
Includes runners, fixing brackets, spacers and fixing screws
Grey lacquered steel
More...

The actual width of the 1000 basket for clearances purposes is 876mm
Includes runners, fixing brackets, spacers and fixing screws
Grey lacquered steel

More...

Tambour pull-out table for 600mm wide unit, white laminate surface

Two tier cleaning utensil rack, 323mm wide, chrome
2-Tier chrome cleaning material baskets for mounting onto back of cabinet door inside cabinet. Suitable for use in base units 400mm wide and over.
Dimensions: -
. 323mm wide
. 102mm deep
. 380mm high

Single tier cleaning utensil rack, 295mm wide, chrome
Single tier, chrome cleaning material basket for mounting onto back of a cabinet door, inside the cabinet. Suitable for use in base units 400mm wide and over.
Dimensions: -
. 295mm wide
. 100mm deep
. 110mm high

Lockable cleaning utensil pull-out unit, 202mm wide, chrome
Lockable chrome slide out basket to keep cleaning utensils safe. Ideal for undersink storage. Comes supplied with runners and can be used left or right hand (don't use on hinged side). Includes 2 keys.
Dimensions: -
202mm wide
432mm deep
440mm high

Microwave door hinge, 2 gas springs, 450-600mm units, 4kg, steel
The KMHS requires the following to be fitted: -
Internal width of 411- 570mm
Minimum internal depth: 220mm
Minimum internal height: 320mm
Maximum door weight: 4Kg
The useable cabinet space: -
Width = Internal width minus 70mm
Height = Internal height minus 40mm
The door opens out and then upwards, finishing 370mm higher than it's original position. The back of the door stands forward (protrudes) 120mm when opened (and up to 225mm during the opening operation).

Mixer lift/support for 450-600mm wide unit
A versatile mechanism for supporting electric mixers or other kitchen appliances on a surface which remains horizontal at all times. Ideal concealed storage in a base unit. The mechanism includes plates for the attachment and support of the worksurface (not supplied).
. System has 4 springs and a loading capacity of 12Kg.
. Useable height 290mm (less thickness of worksurface).
. Installation width steplessly adjustable from 410 - 570mm.

Spice rack 202mm wide, chrome
The KSR30C is suitable for use with 300mm doors. It screw fixes to the back of a door at 191mm centres.
Dimensions: -
. 202mm wide
. 66mm deep
. 425mm high

Two tier sink pull-out unit with runners, 217mm wide, chrome
Pull-out basket designed for under sink installation, for the storage of bottles of cleaning fluids and other cleaning/household equipment. It is a 2-tier pull-out supplied with runners, suitable for use in base units 300mm wide and over. Can be fitted left or right hand (don't use on hinged side).
. 217mm wide
. 470mm deep
. 420mm high

Mechanism only for pullout table (see item TTFTM for table top)
The table extends to 810mm
Minimum cabinet width 450-900mm
Minimum cabinet depth 500mm
Maximum load capacity 30kg

Table top, 600mm unit, grey speckled (to go with KTFTM pull out mechanism)
2x table tops, grey speckled surface with speckled pvc edges.

Top sizes: 546mm wide x 423mm deep.

General Information : -
An excellent solution to creating extra working space or eating area. Ideal for kitchens where space is limited. Comprises of sleek runner system and stylish grey speckled surface with pvc edges. When the drawer unit is opened the table sections sit flush, providing a streamlined surface.

The system components; table mechanism and table top (600mm wide) are supplied separately. This allows the option to use other materials for the top and to use at various widths.

Maximum top thickness: 19mm.

4 tier wine rack, 260mm wide, chrome effect
Wine rack in chrome. Screw fixes to the side and/or the back of the carcase. 4 washers provided (screws not supplied). Holds 12 standard bottles.
260mm wide
185mm deep
490mm high

Evoline V Dock with 3 plug sockets 13A, a new innovation offering access to power everyday appliances.
The system sits on the top of the worktop against the wall and has 3 plug sockets.
This version is for wiring into the ring main (see VD3SIW for version with cable and plug)

Evoline port, 2 sockets, 20 amp, silver
Evoline Port is available in 2 and 3 socket options, with a choice of silver or solid stainless steel cover with matching collar, or chrome with black collar.
2 socket option (20A/250V) supplied with 2m cable
Suitable for worksurfaces with a maximum of 50mm thickness.
total height - 265mm
height above worksurface - 185mm
width at widest point - 127mm
width of base 100mm

Evoline port, 2 sockets, 20 amp, Stainless Steel finish
Evoline Port is available in 2 and 3 socket options, with a choice of silver or solid stainless steel cover with matching collar, or chrome with black collar.
2 socket option (20A/250V) supplied with 2m cable
Suitable for worksurfaces with a maximum of 50mm thickness.
total height - 265mm
height above worksurface - 185mm
width at widest point - 127mm
width of base 100mm

Evoline port, 2 sockets, 20 amp, chrome
Evoline Port is available in 2 and 3 socket options, with a choice of silver or solid stainless steel cover with matching collar, or chrome with black collar.
2 socket option (20A/250V) supplied with 2m cable
Suitable for worksurfaces with a maximum of 50mm thickness.
total height - 265mm
height above worksurface - 185mm
width at widest point - 127mm
width of base 100mm

Evoline port, 3 sockets, silver
Evoline Port is available in 2 and 3 socket options, with a choice of silver or solid stainless steel cover with matching collar, or chrome with black collar.
3 socket option (13A/250V) supplied with 2.5m cable
Suitable for worksurfaces with a maximum of 50mm thickness.
total height - 337mm
height above worksurface - 261mm
width at widest point - 127mm
width of base - 100mm

Evoline port, 3 sockets, stainless steel effect
Evoline Port is available in 2 and 3 socket options, with a choice of silver or solid stainless steel cover with matching collar, or chrome with black collar.
3 socket option (13A/250V) supplied with 2.5m cable
Suitable for worksurfaces with a maximum of 50mm thickness
total height - 337mm
height above worksurface - 261mm
width at widest point - 127mm
width of base - 100mm

Evoline port, 3 sockets, Chrome effect
Evoline Port is available in 2 and 3 socket options, with a choice of silver or solid stainless steel cover with matching collar, or chrome with black collar.
3 socket option (13A/250V) supplied with 2.5m cable
Suitable for worksurfaces with a maximum of 50mm thickness
total height - 337mm
height above worksurface - 261mm
width at widest point - 127mm
width of base - 100mm

Evoline port, 3 sockets, + 2 RJ45 Cat 5e network sockets Silver effect
Evoline Port is available in 2 and 3 socket options, with a choice of silver or solid stainless steel cover with matching collar, or chrome with black collar.
3 socket option (13A/250V) supplied with 2.5m cable
Suitable for worksurfaces with a maximum of 50mm thickness
total height - 337mm
height above worksurface - 261mm
width at widest point - 127mm
width of base - 100mm

Evoline port, 3 sockets, + 2 RJ45 Cat 5e network sockets Chrome effect
Evoline Port is available in 2 and 3 socket options, with a choice of silver or solid stainless steel cover with matching collar, or chrome with black collar.
3 socket option (13A/250V) supplied with 2.5m cable
Suitable for worksurfaces with a maximum of 50mm thickness
total height - 337mm
height above worksurface - 261mm
width at widest point - 127mm
width of base - 100mm

Evoline port, 3 sockets, + 2 RJ45 Cat 5e network sockets Stainless Steel effect
Evoline Port is available in 2 and 3 socket options, with a choice of silver or solid stainless steel cover with matching collar, or chrome with black collar.
3 socket option (13A/250V) supplied with 2.5m cable
Suitable for worksurfaces with a maximum of 50mm thickness
total height - 337mm
height above worksurface - 261mm
width at widest point - 127mm
width of base - 100mm

2 arm towel rail, 380mm deep, plastic, ral 9001 almond
Towel rail, plastic/steel, 2-arm: -
380 mm deep
70 mm high
88mm wide

2 arm towel rail, 440mm deep, aluminium with anodised silver effect.
NB PICTURE SHOWS 3 ARM VERSION
440 mm deep, 95 mm wide, 38 mm high
398mm deep holder (part that fixes to cabinet)

Finishes - aluminium with anodised silver effect(SI) (see RTR2CH for chrome effect)
(see also 3 arm versions RTR3SI and RTR3CH)

3 arm towel rail, 440mm deep, aluminium with anodised silver effect.
440 mm deep, 95 mm wide, 38 mm high
398mm deep holder (part that fixes to cabinet)

Finishes - Silver effect (SI) (see RTR3CH for chrome effect)
High quality aluminium towel rail with roller glide action. Flexible design to enable vertical or horizontal mounting. (see also 2 arm versions RTR2CH and RTR2SI)

2 arm towel rail, 440mm deep, chrome effect
NB PICTURE SHOWS 3 ARM VERSION
440 mm deep, 95 mm wide, 38 mm high
398mm deep holder (part that fixes to cabinet)

Finishes - Chrome effect (CH) (see RTR2SI for aluminium with anodised silver effect)
(see also 3 arm versions RTR3SI and RTR3CH)

3 arm towel rail, 440mm deep, chrome effect
440 mm deep, 95 mm wide, 38 mm high
398mm deep holder (part that fixes to cabinet)

Finishes - Chrome effect (CH) (see RTR3SI for aluminium with anodised silver effect)
High quality aluminium towel rail with roller glide action. Flexible design to enable vertical or horizontal mounting. (see also 2 arm versions RTR2CH and RTR2SI)

Under wall unit tray with utensils, 1000mm unit, beech
Under wall accessory tray suitable for a 1000mm wall unit. Made from 26mm thick solid beech, 963mmx300mm.
Accessories included:
mini-grater
cheese knife
kitchen knife
vegetable slicer
cake slice
pizza-cutter
universal tin-opener
universal peeler
corkscrew
ice cream scoop
portioning device
nutcracker
apple corer
pasta cutter
bottle opener

LIFT UP FITTING SILVER 600mm
For lifting door panels used on tall units to cover built-in electrical appliances such as microwaves and grills.
The fitting consists of 2 sprung arms connected by a cross bar which also helps support and stabilise the door when being lifted.
The mechanism pushes the door panel out 85 mm before lifting it up 370 mm
Suitable for 600 mm wide cabinets, installed width 565 ± 7 mm
Suitable for door heights 370 - 450 mm
Grey (RAL 7040) Steel

Foldaway fittings for cabinets 350-600
For holding heavier kitchen appliances
In fully extended position the shelf lies flush with the worktop
Lift up to release the locking mechanism when returning to stored position
Load bearing capacity 8 kg
For cabinet widths 350 - 600 mm. Installation width is optional between 300 mm and 568 mm as the two arms are completely separate
Swivel depth 445 mm
Maximum shelf width is internal cabinet width less 90 mm, shelf depth = 300 mm
The cranked mounting brackets prevent the door hinges fouling the shelf when raised
When mounted directly beneath the worktop the smallest remaining useable height within the cabinet is 340 mm
Galvanized steel 150N tension springs
White lacquered steel

FOLDING STEP STEEL WHITE/GREY
A robust but compact folding step stool for building into a kitchen
Stepfix has large steps, 200 x 300 mm covered with non slip rubber treads
465 mm height x 405 mm width x 95 mm depth when folded
White epoxy coated steel frame with brown or grey plastic rollers, end caps and rubber treads

Rapid pull out table for 500 bases (whitegrey fleck)
Self supporting table
Pull out length 800 mm, installation width 561 mm
A complete assembly for installation in place of a drawer in a standard 600 mm wide base cabinet
Load bearing capacity 100 kg
Wooden assembly section and guides
Partially slatted laminated table top

Rapid pull out table for 600 bases (whitegrey fleck)
Self supporting table
Pull out length 800 mm, installation width 561 mm
A complete assembly for installation in place of a drawer in a standard 600 mm wide base cabinet
Load bearing capacity 100 kg
Wooden assembly section and guides
Partially slatted laminated table top

Presto pull out legs (silver finish)
Height adjustable
Silver epoxy coated steel tubing
Black plastic castors

Presto pull out table for 600mm wide base cabinets Grey fleck finish
Presto is a full size breakfast table for four which can be stowed away in the same space normally allowed for a 600 mm wide base cabinet
Load bearing capacity 110 kg
Choice of installation: Fit Presto into a cabinet or in the space between 2 cabinets. It is a complete assembly so either is possible
It is usual to fit drawer/door fronts matching the kitchen to the front of the table
Presto pull out table
Solid beech extending guides
Partially slatted white/grey flecked laminated table top

Polished chrome plated steel towel rail 2 rails inc ball bearing runner
With 2 rails
Side or top mounting, for fitting left or right within a cabinet or under a worktop
Installed length 480 mm, extension length 405 mm
Incorporating ball bearing runner
Polished chrome-plated steel

Polished steel towel rail 3 rails inc ball bearing runner
With 3 rails
Side or top mounting, for fitting left or right or under a worktop
Incorporating ball bearing runner
Polished chrome-plated steel

Silver anodised Aluminium towel rail 2 rails 410 long
With 2 rails
By adjusting the position of the mounting bar through 90° can be fitted left or right within a cabinet or under a worktop
Installed length 450 mm, extension length 345 mm
Runners have three position rollers
Silver anodised aluminum mounting bar and rail with plastic end caps

Silver anodised Aluminium towel rail 3 rails 410 long
With 3 rails
Can be used side or top mounting simply by adjusting the position of the mounting bar through 90°
Runners have three precision rollers
Anodised aluminium mounting bar and rail with plastic end caps

Silver anodised Aluminium towel rail 2 rails 270 long
With 2 rails
Shorter length for fitting into shallow bathroom cabinets.
Can be used side or top mounting simply by adjusting the position of the mounting bar through 90°
Runners have three precision rollers
Anodised aluminium mounting bar and rail with plastic end caps

Shelf basket 100mm depth fixing hole centre 300mm
For fitting out kitchen cabinets
78 mm high, 300mm hole centres, 100mm depth
Screw fixing, order Ø 5 mm pan head screws separately
Heavier gauge chrome-plated steel

Shelf basket 100mm depth fixing hole centre 400mm
For fitting out kitchen cabinets
78 mm high, 400 mm hole centres, 100mm depth
• Screw fixing, order Ø 5 mm pan head screws separately
• Heavier gauge chrome-plated steel

Shelf basket 225mm depth fixing hole centre 300mm
For fitting out kitchen cabinets
78 mm high, 300mm hole centres, 225 mm depth
• Screw fixing, order Ø 5 mm pan head screws separately
• Heavier gauge chrome-plated steel

Shelf basket 225mm depth fixing hole centre 400mm
For fitting out kitchen cabinets
78 mm high, 400mm hole centres, 225 mm depth
• Screw fixing, order Ø 5 mm pan head screws separately
• Heavier gauge chrome-plated steel

cleaning materials rack one tier
Screw fixing
Chrome-plated steel

Cleaning materials rack two tier
Screw fixing
Chrome-plated steel

Drawer insert mats 5m light grey nap finish rubber
1 mm thick, 500 mm wide
Light grey ‘Nap finish’ rubber

Lockable Cleaning Materials Basket
Chrome plated steel cage and pull out, base fixing
For left or right hand mounting
Guides included for left or right hand
Min. installation depth 450 mm
Min. installation width 205 mm
Min. installation height 390 mm

Aluminium Base Liner 1000mm
525 mm depth can be easily reduced by customer by up to 50 mm
For 18 mm board thickness
Aluminium

Aluminium Base Liner 1200mm
525 mm depth can be easily reduced by customer by up to 50 mm
For 18 mm board thickness
Aluminium

Aluminium Base Liner 600mm
525 mm depth can be easily reduced by customer by up to 50 mm
For 18 mm board thickness
Aluminium

Aluminium Base Liner 800mm
525 mm depth can be easily reduced by customer by up to 50 mm
For 18 mm board thickness
Aluminium

Aluminium Base Liner 900mm
525 mm depth can be easily reduced by customer by up to 50 mm
For 18 mm board thickness
Aluminium

BUILT-IN IRON BOARD DRAW WHITE
For installation in the drawer space of most standard base cabinets
When the drawer is opened the supports automatically extend
Hinging front section permits trousers, shirts to be pulled easily over the board
Internal cabinet width required; between 362 and 500 mm
Cabinet depth; minimum 500 mm required
Complete set comprises;
2 cabinet rails
1 collapsible ironing board support system with pre-assembled 2-part extending runners
1 folding ironing board
1 ironing board cover
Fixing materials
Operating and mounting instructions
White (RAL 9016) plastic-coated steel ironing board
White and grey striped cotton cover with a foam lining and an elastic gathering to ensure a good fit
Sleeve arm available; information on request

Base Unit liner - single. Aluminium.
For 18 mm board thickness

Suit holder chrome plated

Revolving fitting and frame for 800mm or 1000mm
Order frame, baskets, rear basket rail and trouser/tie rack separately, as required
Revolving fitting and frame for cabinet widths 800 mm or 1000 mm
Installed depth min 550 mm
Installed height 2162 mm
Load capacity 100 kg
White aluminium Ral 9006 steel with protective lacquer
Baskets for cabinet widths 800 mm or 1000 mm
Installed depth min 550 mm
Installed height 2162 mm
Load capacity 100 kg
Chrome-plated steel
Rear rail for baskets
Chrome-plated steel
Trouser and tie rack with light grey plastic utensil tray, chrome-plated steel with non-slip plastic coating