Freelight system double socket, 250v, 82mm wide stainless steel
The Freelight system is a range of light fittings, switches and sockets which are fitted to the underside of the wall cabinets. They can be fitted in a continuous row or at random to suit. Supplied with 2 metres of cable. Stainless steel finish.

WARNING: All electrical fittings must be installed by a qualified electrician. Care must be taken where lights are enclosed in a cabinet, ensure there is adequate ventilation. Light fittings should not be fitted in the vicinity of flammable surfaces. Low voltage lamps must never be touched by unprotected fingers.

Freelight system single light, 20w, 82mm wide, stainless steel
The FLSLSS is a 20 watt, 12 volt lamp which requires the use of a transformer (not supplied). It comes with a time saving connector which is compatible with the MD1 mini distributor and EC1000 extension cable. It is not switched, however, suitable switches are available in the Freelight range.

. 12V, G4, 20W halogen lamp (for replacement use RL20).
. Allow minimum 300mm from illuminated objects.
The Freelight system is a range of light fittings, switches and sockets which are fitted to the underside of the wall cabinets. They can be fitted in a continuous row or at random to suit. Supplied with 2 metres of cable. Stainless steel finish.

WARNING: All electrical fittings must be installed by a qualified electrician. Care must be taken where lights are enclosed in a cabinet, ensure there is adequate ventilation. Light fittings should not be fitted in the vicinity of flammable surfaces. Low voltage lamps must never be touched by unprotected fingers.

Freelight system single socket, 250v, 82mm wide, stainless steel
The Freelight system is a range of light fittings, switches and sockets which are fitted to the underside of the wall cabinets. They can be fitted in a continuous row or at random to suit. Supplied with 2 metres of cable. Stainless steel finish.

WARNING: All electrical fittings must be installed by a qualified electrician. Care must be taken where lights are enclosed in a cabinet, ensure there is adequate ventilation. Light fittings should not be fitted in the vicinity of flammable surfaces. Low voltage lamps must never be touched by unprotected fingers.

Galaxy switched downlighter, 20w, 12v, 120mm long, stainless steel

Login triangular cornice light, 20w, 12v, stainless steel/glass
Supplied with 20w 12V G4 halogen lamp. The RL20 replacement bulb is
Suitable for use with this light fitting
Projection - 173mm
180mm on all 3 sides
Height when installed - 62mm (projection)
For use with a 12v transformer

Low voltage diffused downlighter, surface mounted, 20w,12v, chrome
78mm diameter light fitting
37mm high of which 17mm is concealed in recess.
Recessed in a 65mm diameter hole.
12V, G4, 20W halogen lamp.
A minimum distance of 300mm is required between the lamp and the illuminated object.

Low voltage diffused downlighter, deep recessed, 20w,12v, aluminium
68mm diameter light
18mm high of which approx. 17mm is concealed in recess.
Requires 57 - 60mm diameter hole.
Allow minimum 300mm from illuminated objects.
12V, G4, 20 watt halogen lamp

Low voltage downlighter, surface mounted, 20w, 12v, aluminium effect
68mm diameter light fitting.
20mm high (when surface mounted).
2 screws at 42mm centres for surface mounting (supplied)
18mm thick when recess fitted (17mm concealed).
49mm diameter hole required for recess mounting.
Allow minimum 300mm from illuminated objects.
12V, G4, 20 watt halogen lamp

Low voltage downlighter, surface mounted for concealed fixing, 20w, 12v, chrome effect
Light fitting is 80mm diameter at ceiling tapering to 52mm.
Light fitting 27mm high.
Screw fitted at 50mm centres (2 x screws supplied).
Requires a 5mm diameter hole to feed through cables.
Allow minimum 300mm from illuminated objects.
12V, G4, 20W halogen lamp

Halogen light with built in sensor, 20w, chrome
A halogen downlighter which can be placed into flying shelves or cornice to project light from above wall units. An added feature of this light is the built-in sensor, which automatically switches off the light when a cupboard door is opened to prevent any heat damage to the door. When the door is closed the light automatically switches back on. 72mm diameter x 0.6mm thick fascia in chrome finish.
Requires 65mm diameter cut out. G4, 20W-halogen lamp supplied
Suitable for use with 12V transformer

Saturno angled downlighter with diffuser, 20w,12v, 68mm diameter, aluminium
An aluminium or chrome angled downlighter with satin glass diffuser, suitable for use under wall cabinets to light up worksurface areas. Traditional lighting pelmet is not required. Supplied with 20W, G4 halogen lamp and suitable for use with a 12V transformer.
68mm diameter
44mm high
has 20 degree incline
supplied with 2m cable
includes connector compatible with MD1 mini distributor

Wind angled downlighter with diffuser, 20w,12v, 150mm wide, aluminium with glass fascia
A stylish angled downlighter in aluminium and featuring a protective glass fascia. Supplied with a 20W G4 halogen lamp. Suitable for use with a 12V transformer, the light consists of a metal support, aluminium housing & satin glass diffuser.
150mm wide
105mm high
105mm deep
supplied with 150mm cable & 2m extension
includes connector compatible with MD1 mini distributor

Wide angled light with diffuser, 20w 12V, stainless steel
A stylish angled downlighter in stainless steel and featuring a protective glass fascia. Supplied with a 20W G4 halogen lamp. Suitable for use with a 12V transformer, the light consists of a metal support, steel housing & satin glass diffuser.
150mm wide
105mm high
105mm deep
supplied with 150mm cable & 2m extension
includes connector compatible with MD1 mini distributor

Pyramid light, 20w,12v, 130mm wide, aluminium
Stylish small triangular light which fits to the underside of wall cabinets. Traditional lighting pelmet not required. Supplied with a 20W, G4 halogen lamp and 1 metre of cable. Cable includes time saving connectors, which are also compatible with the MD1 mini distributor and EC1000 extension cable. Use with a 12-volt transformer.

Size: 130 x 118 x 40mm
Lamp: 12V, 20W, G4 (use RL20 for replacement)
Allow minimum 300mm from illuminated objects.

Trial pyramid light, 20w 12v stainless steel
Large triangular light which fits to the underside of wall cabinets. Traditional lighting pelmet not required. Supplied with a 20W, G4 halogen lamp and 1 metre of cable. Cable includes time saving connectors, which are also compatible with the MD1 mini distributor and EC1000 extension cable. Use with a 12-volt transformer.

Size: 200 x 165 x 40mm
Lamp: 12V, 20W, G4 (use RL20 for replacement)
Allow minimum 300mm from illuminated objects.

Time round cornice light, 20w, 12v, stainless steel/glass
Time round cornice light, stainless steel and glass.
150mm diameter light
62mm projection
Only use halogen lamps with a light pressure G4, 12V 10- 20 watt halogen
lamp
For use with a 12v transformer.

Titanio pop-out light for wardrobe, 20w, 12v, white
This light has been designed with wardobes in mind and can be used with hinged or sliding doors. The light pops out and switches itself on when the cupboard door is opened and off when closed. The special rotating arm ensures that movement is always smooth. A rubber seal protects the light and provides and provides smooth operation. Supplied with a 20W lamp, 2m of cable and a built in 12V transformer. White.

400mm long when fully extended. 95mm high.

N.B. A minimum 300mm distance is required between the lamp in it's operating position and the item/s to be lit. Prevent normal inflammable materials from coming close to the spotlight when closing the door, since, even when switched off, the lamp remains at a high temperature for a very short time.
For replacement lamp use 20W, 12V, G4 halogen lamp

Freelight system double light, 20w,12v, 450mm wide, stainless steel
FLDLSS: This light includes a built in transformer. It contains 2 x 20W lamps and a switch.
The Freelight system is a range of light fittings, switches and sockets which are fitted to the underside of the wall cabinets. They can be fitted in a continuous row or at random to suit. Supplied with 2 metres of cable. Stainless steel finish.

Mini distributor for cornice lights, 100w capacity, 500mm long cable
The MD1 is a power distributor suitable for the Quasar, Giove, & Class projecting cornice cabinet lighting as well as the Pyramid, Galaxy, Wind, Saturno & FLSLSS Free light. It features 6 female sockets. Black.
max power 10A at 30V
max 5A for each socket
102mm long x 18mm wide x 28mm high
cable length is 500mm
100W capacity, therefore suitable for a max. 5 of the above mentioned lights.

Picchio cornice light, 20w, 12v, 120mm high, nickel
Picchio cornice light. 15mm diameter x 210mm front to back x 130mm high.

The Picchio cornice light features a stylish frosted glass diffuser and slender nickel or chrome metal body. Each option is supplied with 20W, G4 halogen lamps and both should be used with 12V transformers.

Duo projecting cornice light, 2x20w, 12v, 65mm high, nickel
A projecting cornice light. 210mm wide x 180mm front to back x 65mm high.

The duo range of low voltage lighting help to create a calming & serene atmosphere. This stylish range includes an arched light and projecting cornice light option. All feature nickel or chrome finished bodies and two delicate frosted glass diffusers. They are supplied with 2x 20W, G4 halogen lamps and should be used with 12V transformers.

Duo arched cornice light, 2x20w, 12v, 70mm high, nickel
An arched light which can be be used instead of, or on top of a cornice. It is ideal for use on a flying shelf.

210mm wide
100mm front to back (of which up to 80mm can project over unit).
105mm high (it sits 75mm higher than the surface to which it is attached and 30mm below).

Care should be used when planning to use over a cupboard as it may prevent the door opening.

The duo range of low voltage lighting help to create a calming & serene atmosphere. This stylish range includes an arched light and projecting cornice light option. All feature nickel or chrome finished bodies and two delicate frosted glass diffusers. They are supplied with 2x 20W, G4 halogen lamps and should be used with 12V transformers.

Cornice Light, 12v 2 x 10W fixed head. Scew fixing surface mounted. 2m lead with easy to fit plug connectors. Steel arm. Lamp: 20W Halgen MR16 (Supplied)
Screw fixing, surface mounted
Size: 60 mm high
1 each 200 mm and 2000 mm lead with easy to fit plug connectors
Matt chrome plated steel
2 x 10W halogen bulbs included
Transformer is not included and must be ordered seperately - Please see Don't Forget To Order
2 x Pointed, cylinder mesh or glass shades must be ordered separately - Please see Don't Forget To Order

Cornice Light, 12v/20W fixed head. Scew fixing surface mounted. 2m lead with easy to fit plug connectors. Steel arm. Lamp: 20W Halgen MR16 (Supplied)
2000 mm lead with plug contacts
20W halogen bulb included
Steel arm

ELEC TRNSFM W DISTRIB 12V/70W
With 3000 mm bare ended mains lead
With 5 or 6 way distributor
Plastic
It is recommended that the correct number of lights to match the wattage output are used with these transformers to ensure long bulb life. Care must be taken not to overload the transformers