Adjustable table leg, 710mm high, steel, polished chrome, ONE LEG
With an adjustable foot, this series leg fixes to the underside of the work surface using a screw-fix patented die-cast socket. Once the socket is screwed onto the surface, the tube is locked into place by expanding the socket boss using a hexagonal key. The leg can be removed for storage and transportation. This system gives an exceptionally strong and stable support even on the largest of tables. Available in various finishes. ONE LEG.

. 60mm diameter
. 710mm high
. +30mm adjustment
. Loading capacity of 570Kg
. Minimum 20mm work surface required.

Adjustable table leg, 710mm high, steel, polished chrome, set of 4
With an adjustable foot, this series leg fixes to the underside of the work surface using a screw-fix patented die-cast socket. Once the socket is screwed onto the surface, the tube is locked into place by expanding the socket boss using a hexagonal key. The legs can be removed for storage and transportation. This system gives an exceptionally strong and stable support even on the largest of tables. Available in various finishes. Pack of 4.

. 60mm diameter
. 710mm high
. +30mm adjustment
. Loading capacity of 570Kg
. Minimum 20mm work surface required.

Adjustable table leg, 870mm high, steel, polished chrome, ONE LEG
With an adjustable foot, this series leg fixes to the underside of the work surface using a screw-fix patented die-cast socket. Once the socket is screwed onto the surface, the tube is locked into place by expanding the socket boss using a hexagonal key. The leg can be removed for storage and transportation. This system gives an exceptionally strong and stable support even on the largest of tables. Available in various finishes. ONE LEG.

. 60mm diameter
. 870mm high
. +30mm adjustment
. Loading capacity of 570Kg
. Minimum 20mm work surface required.

Adjustable table leg, 870mm high, steel, Black Finish, ONE LEG
With an adjustable foot, this series leg fixes to the underside of the work surface using a screw-fix patented die-cast socket. Once the socket is screwed onto the surface, the tube is locked into place by expanding the socket boss using a hexagonal key. The leg can be removed for storage and transportation. This system gives an exceptionally strong and stable support even on the largest of tables. Available in various finishes. ONE LEG.

. 60mm diameter
. 870mm high
. +30mm adjustment
. Loading capacity of 570Kg
. Minimum 20mm work surface required.

Set of 4. Adjustable table leg, 870mm high, steel, polished chrome
With an adjustable foot, this series leg fixes to the underside of the work surface using a screw-fix patented die-cast socket. Once the socket is screwed onto the surface, the tube is locked into place by expanding the socket boss using a hexagonal key. The legs can be removed for storage and transportation. This system gives an exceptionally strong and stable support even on the largest of tables. Available in various finishes. Pack of 4.

. 60mm diameter
. 870mm high
. +30mm adjustment
. Loading capacity of 570Kg
. Minimum 20mm work surface required.

20º Angled Breakfast bar support, glue fixing. Polished chrome.
For fixing to glass countertops
Ø 50 mm tube
Chrome plated. Steel tube, zinc alloy base
Order item TLGLUE10 if you require the correct glue

20º Angled Breakfast bar support, glue fixing. Matt chrome.
For fixing to glass countertops
Ø 50 mm tube
Chrome plated. Steel tube, zinc alloy base
Order item TLGLUE10 if you require the correct glue

20º Angled Breakfast bar support, screw fixing
Polished chrome.
For fixing to wooden countertops
Ø 50 mm tube. Steel tube, zinc alloy base

20º Angled Breakfast bar support, screw fixing
Matt chrome.
For fixing to wooden countertops
Ø 50 mm tube. Steel tube, zinc alloy base

White finish adjustable table leg, 870mm high, 60mm steel, for supporting breakfast bar or worktop
With an adjustable foot, this series leg fixes to the underside of the work surface using a screw-fix patented die-cast socket. Once the socket is screwed onto the surface, the tube is locked into place by expanding the socket boss using a hexagonal key. The legs can be removed for storage and transportation. This system gives an exceptionally strong and stable support even on the largest of tables. Available in other finishes too.

. 60mm diameter
. 870mm high
. +30mm adjustment
. Loading capacity of 570Kg
. Minimum 20mm work surface required.

TUBE 1300mm 60mm Chrome plated STEEL
For individual design and assembly of table legs, supporting legs for counters, wardrobes etc
Wall thickness 1.2 mm
Steel
1300 mm length

TUBE 1300mm 60mm Stainless steel colour clear lacquer STEEL
For individual design and assembly of table legs, supporting legs for counters, wardrobes etc
Wall thickness 1.2 mm
Steel
1300 mm length

TUBE 1300mm 80mm Chrome Plated STEEL
For individual design and assembly of table legs, supporting legs for counters, wardrobes etc
Wall thickness 1.2 mm
Steel
1300 mm length

TUBE 1300mm 80mm Stainless Steel colour lacquered STEEL
For individual design and assembly of table legs, supporting legs for counters, wardrobes etc
Wall thickness 1.2 mm
Steel
1300 mm length

Mounting plate for 60mm and 80mm tube
Dark grey zinc alloy

Cone
For the top connector to Steel tube, for insertion to 60mm tube

Cone
For the top connector to Steel tube, for insertion to 80mm tube

Adjustable foot for use with steel tube (60mm) has + 25mm height adjustment.
Black Plastic

Adjustable foot for use with steel tube (80mm) has + 25mm height adjustment.
Black Plastic

Adjustable foot for use with steel tube (60mm).
With 110mm (+40mm/-70mm)height adjustment.
With height scale, one turn = 5mm height adjustment, locakable to position with clamping ring.
Adjustable under load.
Foot plate does not revolve with adjustment.
Black plastic.

For use with 60mm legs
Fixing bolt supplied
For glueing to the underside of the glass table top
Note you will also need the 'cone' item ref 63506025 as an insert

Adjustable peninsular support leg, Ø 80 mm
Telescopic assembly allows full length adjustability between 710 to 975 mm
Tubular steel leg with black plastic adjustable mounting plate and fittings
Height adjustment at both ends of the leg
Black plastic height adjustable foot giving +25 mm adjustment
These legs should not be used for stand alone tables, only for fixed peninsular supports.


. 80mm diameter
. 710mm to 975mm
. +30mm adjustment
. Minimum 28mm work surface required.

Breakfast bar lifting system, 660-1100mm height adjustment, silver
An adjustable table mechanism which provides efficient working space for the modern day kitchen. A lever easily adjusts the height of the table top to suit the job in hand. The system is based on a stylish round column in a silver finish which performs at it's best with a worktop (not supplied) of 18-25kg. The overall capacity of the mechanism is 30kg.

. The column has a height adjustment of 660 to 1100mm plus the thickness of the worktop.

. The distance from the wall can be set from 875mm to 1175mm from wall to mid-column. Supplied with all necessary fittings to assemble the column.

. When an existing worktop is fitted to the wall and is 600mm deep; the worktop on the table mechanism can be a maximum 1100mm deep x 800mm wide.

. When used as a stand alone table the worktop can be maximum 1100mm x 900mm wide.

Table base plate: 451mm x 451mm.

Top motion lifting system, 665-1105mm height adjustment, matt silver
Topmotion is a height adjustable table mechanism with push down lever, which operates by means of a gas spring system. Supplied in matt chrome finish.

Topmotion has a height range of 655mm to 1105mm plus the thickness of the worktop (not supplied) and a loading capacity of 30Kg. Worktop diameter should not exceed 800mm.

Supplied in 3 pieces; a top plate to attach to a tabletop, an 80mm diameter column which features 450mm height adjustment and a 520mm diameter weight loaded base with 5 adjustable feet.

NB Instructions must be read and followed before trying to operate the table.

Bespoke worksurfaces are available from Second Nature.

Adhesive kit for tableline bar supports
A structural adhesive kit for joining glass to metal surfaces. This system is specifically designed for use with glue-fix tableline bar supports and clear glass. The kit comprises of a 10ml activator and 10ml adhesive.

The activator should be applied to total area of the glass where the leg is to be attached and the adhesive applied to the metal in several small drops. The glass is pressed for approx. 15 seconds and the adhesive spreads forming a film.

The adhesive is a pale yellow colour but colourless when it has been applied. Although this adhesive cures quickly, the glass shelf should be left overnight before being used.

Each bottle should suit approx 10-12 tableline support legs.