£56.64

LIFT UP FITTING SILVER 600mm
For lifting door panels used on tall units to cover built-in electrical appliances such as microwaves and grills.
The fitting consists of 2 sprung arms connected by a cross bar which also helps support and stabilise the door when being lifted.
The mechanism pushes the door panel out 85 mm before lifting it up 370 mm
Suitable for 600 mm wide cabinets, installed width 565 ± 7 mm
Suitable for door heights 370 - 450 mm
Grey (RAL 7040) Steel

find out more

£39.87

TUBE 1300mm 60mm Chrome plated STEEL
For individual design and assembly of table legs, supporting legs for counters, wardrobes etc
Wall thickness 1.2 mm
Steel
1300 mm length
find out more

£18.57

Adjustable table leg, 870mm high, steel, polished chrome, ONE LEG
With an adjustable foot, this series leg fixes to the underside of the work surface using a screw-fix patented die-cast socket. Once the socket is screwed onto the surface, the tube is locked into place by expanding the socket boss using a hexagonal key. The leg can be removed for storage and transportation. This system gives an exceptionally strong and stable support even on the largest of tables. Available in various finishes. ONE LEG.

. 60mm diameter
. 870mm high
. +30mm adjustment
. Loading capacity of 570Kg
. Minimum 20mm work surface required.

find out more

£8.77

Cone
For the top connector to Steel tube, for insertion to 60mm tube
find out more

£20.86

Straight breakfast Bar Support, for gluing. Polished chrome.

Size of Support: H200 x D50mm Please Note: Maximum distance apart 600mm, 15KG maximum weight per leg. Overhang from the centre of the support to the edge of the upper worktop should not exceed 200mm



find out more

£10.97

Adhesive kit for tableline bar supports
A structural adhesive kit for joining glass to metal surfaces. This system is specifically designed for use with glue-fix tableline bar supports and clear glass. The kit comprises of a 10ml activator and 10ml adhesive.

The activator should be applied to total area of the glass where the leg is to be attached and the adhesive applied to the metal in several small drops. The glass is pressed for approx. 15 seconds and the adhesive spreads forming a film.

The adhesive is a pale yellow colour but colourless when it has been applied. Although this adhesive cures quickly, the glass shelf should be left overnight before being used.

Each bottle should suit approx 10-12 tableline support legs.

find out more

£167.20

Built-in depth 480 mm, for cabinet widths 300-600 mm, installed height adjustable from 1950-2200 mm • Every set comes complete with bottom runner, top guide, centre frame, crossbar and bracket, baskets, fixing materials and fitting instructions - 1x Hanging frame , silver epoxy coated tubular steel, 25 x 25 mm, with mounting accessories - 1x Ball bearing runner and top roller guide , silver epoxy coated steel, load carrying capacity 100 kg. The top guide must be fixed under the top panel or shelf, the runner is base mounted - 5x Storage basket , 260 mm wide, heavier gauge chrome plated steel. Specially shaped to hang centrally - 3x Crossbar sets , to fix cabinet doors to larder units, silver epoxy coated steel - 2x Door connecting strips , silver epoxy coated steel
find out more

£117.12

For Mondo 2K corner cabinet
Plastic
find out more